A Review of Assemble Process of OLED Hybrid Structure

[vc_row][vc_column width=”1/6″][/vc_column][vc_column width=”2/3″][vc_raw_html]JTNDaWZyYW1lJTIwd2lkdGglM0QlMjI5NjAlMjIlMjBoZWlnaHQlM0QlMjI1NDAlMjIlMjBzcmMlM0QlMjJodHRwcyUzQSUyRiUyRnd3dy55b3V0dWJlLmNvbSUyRmVtYmVkJTJGUF93ZVdnRDBRMVUlMjIlMjBmcmFtZWJvcmRlciUzRCUyMjAlMjIlMjBhbGxvdyUzRCUyMmFjY2VsZXJvbWV0ZXIlM0IlMjBhdXRvcGxheSUzQiUyMGNsaXBib2FyZC13cml0ZSUzQiUyMGVuY3J5cHRlZC1tZWRpYSUzQiUyMGd5cm9zY29wZSUzQiUyMHBpY3R1cmUtaW4tcGljdHVyZSUyMiUyMGFsbG93ZnVsbHNjcmVlbiUzRSUzQyUyRmlmcmFtZSUzRQ==[/vc_raw_html][vc_column_text]Welcome to DISPLAYBLY.COM.

Today we are going to introduce an assemble process of OLED hybrid structure for nursing equipment.

First, put the double-sided tape on the back of the PCB.

Second, solder the FPC of OLED onto the PCB with tin.

Third, brush off the extra tin on the PCB with industrial alcohol.

Fourth, rip off the protection film from the back of the PCB and make the OLED and the PCB stuck together.

Fifth, quality test with customized equipment and check if it works properly.

Six, visual inspection and packing.

Thank you for watching and contact us if you have any questions.[/vc_column_text][/vc_column][vc_column width=”1/6″][/vc_column][/vc_row]

Published
Categorized as Vlog

Leave a comment

Your email address will not be published. Required fields are marked *